Allen-Bradley 1738-ADNX Manual de usuario Pagina 47
- Pagina / 112
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Publication 1734-UM015A-EN-E - November 2009
DeviceLogix for POINT I/O and ArmorPOINT I/O on Ethernet/ControlNet 45
4. Enter the slot number in the Slot box.
It is not possible to make a Rack connection to the Point I/O
DeviceLogix module. The connection must be a direct one.
On the Connection tab, you can change the Requested Packet Interval
(RPI), the default is 20 ms.
The Module Info tab will display the status and identity information of
the module when the module is online.
There is no tab for configuration. Configuration of the Point I/O
DeviceLogix modules is done only using RSNetworx for DeviceNet.
See Chapter 6
for more details.
RSLogix 5000 will create the following input tags:
• AdapterName:SlotNumber:I.Data
• AdapterName:SlotNumber:I.LogicDefinedData
• AdapterName:SlotNumber:I.Status.LogicEnabled
• AdapterName:SlotNumber:I.Status.Owned
• AdapterName:SlotNumber:I.PeerMissing
• AdapterName:SlotNumber:I.LogicDefinedIntData[0...7]
RSLogix 5000 will create the following output tags:
• AdapterName:SlotNumber:O.Data
• AdapterName:SlotNumber:O.LogicDefinedData
• AdapterName:SlotNumber:O.LogicDefinedIntData[0...7]
- POINT I/O and ArmorPOINT I/O 1
- DeviceLogix Modules 1
- Important User Information 2
- Table of Contents 3
- 2 Table of Contents 4
- Chapter 8 5
- Troubleshooting 5
- Appendix A 5
- Peer Data Maps 5
- 4 Table of Contents 6
- Purpose of This Manual 7
- Who Should Use This 8
- Related Publications 8
- Preface 7 9
- 8 Preface 10
- Introduction 11
- Modes of Usage 12
- Stand Alone DeviceLogix 13
- Peer Enabled POINT I/O 13
- Quick Start - Prepare the 14
- Modules to work on 14
- DeviceNet 14
- EtherNet/IP and ControlNet 15
- 14 Introduction 16
- About This Chapter 17
- ATTENTION 18
- Install the Mounting Base 19
- Assembly 19
- Removable 20
- Terminal Block 20
- Mounting Base 20
- Install an I/O Module 21
- Install the Removable 23
- Remove a 1734-TB or 24
- 1734-TBS Base 24
- Remove a 1734-TOP or 25
- 1734-TOPS Base 25
- Wire the Modules 26
- 1734-VTM 28
- 1734-CTM 28
- Ground lug connection 30
- Latching mechanism 30
- Install the Module 31
- 1738-8CFGDLXM12 I/O Module 33
- 1738-8CFGDLXM23 I/O Module 34
- I/O on DeviceNet 35
- Example: Build the Backplane 36
- Online Configuration using 38
- RSNetWorx for DeviceNet 38
- DeviceLogix module 40
- I/O Data Assembly Maps 41
- DeviceNet. See Chapter 6 44
- for details 44
- I/O on Ethernet/ControlNet 45
- IMPORTANT 46
- I/O Tags 48
- Launch RSNetworx for 49
- DeviceNet to Configure the 49
- Configure Peer 56
- Communication 56
- Produce Data Without 60
- Using a Master 60
- Start the Function Block 63
- DeviceLogix Capabilities 65
- Filter Category 66
- Select Limit Category 66
- Statistical Category 67
- Timer/Counter Category 67
- Comparison Category 68
- Compute Category 69
- Move/Logical Category 70
- Latch Functions 71
- Logic Execution Time 72
- Hardware 73
- Network Analog Input 75
- Peer#x (Word x) 75
- Discrete Output 0 76
- Consume Data Assembly 76
- Byte 0 7 6 5 4 3 2 1 0 76
- DOP: Digital Output Point 77
- EM: Explicit Message 77
- Enable Line feature 79
- Offline and Online Editing 80
- Enable/Disable Logic 81
- Messaging 82
- Counter function blocks 83
- Status Indicators of POINT 86
- I/O Module 86
- Network Status 87
- DeviceLogix Status 87
- I/O Status 87
- Status Indicators of 88
- ArmorPOINT I/O Modules 88
- Troubleshooting Scenarios 90
- Troubleshooting 89 91
- 90 Troubleshooting 92
- 92 Peer Data Maps 94
- 2-Point Digital Input Modules 96
- 4-Point Digital Input Modules 96
- 8-Point Digital Input Modules 97
- 8-Point Configurable Modules 98
- 16-Point Digital Input Module 98
- 1738-8CFGDLXM23 99
- 1738-IR2M12 100
- 4-Point Analog Input Modules 101
- 8-Point Analog Input Modules 102
- Peer Data Maps 101 103
- 1734-IT2I, 1738-IT2IM12 104
- 1738-VHSC24M23 105
- 104 Peer Data Maps 106
- Encoder/Counter Input Modules 107
- 106 Peer Data Maps 108
- Peer Data Maps 107 109
- 108 Peer Data Maps 110
- Rockwell Automation 112
Relacionado con productos y manuales para Redes Allen-Bradley 1738-ADNX
Redes Allen-Bradley 1734-ADN Manual de usuario
(239 paginas)
(239 paginas)
Redes Allen-Bradley PLC-5 Manual de usuario
(2 paginas)
(2 paginas)
Redes Allen-Bradley 1784-KT/B Especificaciones
(67 paginas)
(67 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.109 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales