Allen-Bradley MicroLogix 1761-NET-ENI Manual de usuario descargar pdf (Pagina 53)

Publication 1761-UM006A-EN-P - February 2001

E-Mail Messages (Node 50 to 99) 6-3

Destination Addresses

The ENI stores e-mail addresses; it does not store the e-mail messages.

To store a destination address, write a message to a specific node

number (nodes 150 to 199). The message data must be a string

element that contains a valid e-mail ASCII text string address, as

illustrated in ST15:0 through ST15:5 in the example below.

Message Text

To send the actual e-mail message, the controller generates a write

message, with a string element as the data (see ST15:7 to ST15:9 in the

example above) to a node number (50 to 99) that correlates to the

e-mail address (150 to 199).

The following table shows the relationship between the e-mail

message and the e-mail address. The maximum size of the message is

1 string element of 84 bytes.

IMPORTANT

Remember the following when setting up destination

addresses:

• The ENI can store up to 50 e-mail addresses.

• E-mail addresses can be up to 45 characters long,

exceeding this will result in an error.

• The e-mail address must contain an “@” character.

• E-mail addresses cannot contain any spaces or

any other special ASCII characters other than the

“@” character.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 101 102

Sin comentarios

Allen-Bradley MicroLogix 1761-NET-ENI Manual de usuario Pagina 53